6YL Series Small Screw Oil Press Machine
Product Description
6YL Series small scale screw oil press machine can press all kinds of oil materials such as peanut, soybean, rapeseed, cottonseed, sesame, olive, sunflower, coconut, etc. It is suitable for medium and small scale oil factory and private user, as well as the pre-pressing of extraction oil factory.
This small scale oil press machine is mainly composed of feeder, gearbox, pressing chamber and oil receiver. Some screw oil press machines areequipped with electric motors as required. Pressing chamber is the key partwhich contains a pressing cage and a screw shaft rotating in the cage. An electric cabinet is also necessary to control the whole working procedure.
The operating principle of small scale screw oil press machine
1. When screw oil press machine is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.
2. Under high temperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.
3. On the other hand, root diameter of the pressing screw carries larger from one end to the other.
4. Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.
5. Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every particle inside the chamber to possess different speed.
6. Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil.
The small scale screw oil press machine has its own features and markets
1. Made of high quality steel, wear-resistant and easy to clean.
2. With the properly designed pressing chamber, the increased pressure in the chamber highly improves working efficiency.
3. Low residual: the oil residual in cake is only about 5%.
4. Little land occupancy: only 10-20m2 is enough.
Technical data
|
Model |
6YL-80 |
6YL-100 |
6YL-120 |
6YL-150 |
|
Diameter of shaft |
φ 80mm |
φ 100mm |
φ 120mm |
φ 150mm |
|
Speed of shaft |
63r/min |
43r/min |
36r/min |
33r/min |
|
Main motor power |
5.5kw |
7.5kw |
11kw |
15kw |
|
Vacumm pump |
0.55kw |
0.75kw |
0.75kw |
1.1kw |
|
Heater |
3kw |
3.5kw |
4kw |
4kw |
|
Capacity |
80-150Kg/h |
150-250Kg/h |
250-350Kg/h |
300-450Kg/h |
|
Weight |
830Kg |
1100Kg |
1500Kg |
1950Kg |
|
Dimension(LxWxH) |
1650x1440x1700mm |
1960x1630x1900mm |
2100x1680x1900mm |
2380x1850x2000mm |
Related products
-
Oil Seeds Pretreatment Processing-Destoning
Introduction Oil seeds need to be cleaned to remove plant stems, mud and sand, stones and metals, leaves and foreign material before being extracted. Oil seeds without careful selecting will speed up the wearings of the accessories, and can even lead to damage of the machine. Foreign materials are typically separated out by a vibrating sieve, however, some oilseeds such as peanuts may contain stones which are similar in size to the seeds. Henc...
-
Oil Seeds Pretreatment Processing – Oil S...
Introduction After cleaning, oilseeds such as sunflower seeds are conveyed to the seed dehulling equipment to separate the kernels. The purpose of oil seeds shelling and peeling is to improve the oil rate and the quality of the extracted crude oil, improve the protein content of the oil cake and reduce the cellulose content, improve the use of oil cake value, reduce the wear and tear on the equipment, increase the effective production of equip...
-
204-3 Screw Oil Pre-press Machine
Product Description 204-3 oil expeller, a continuous screw type pre-press machine, is suitable for pre-press + extraction or twice pressing processing for the oil materials with higher oil content like peanut kernel,cotton seed, rape seeds, safflower seeds, castor seeds and sunflower seeds, etc. The 204-3 oil press machine is mainly comprised of feeding chute, pressing cage, pressing shaft, gear box and main frame, etc. The meal enters the pre...
-
Solvent Leaching Oil Plant: Loop Type Extractor
Product Description Solvent leaching is a process to extract oil from oil bearing materials by means of solvent, and the typical solvent is hexane. The vegetable oil extraction plant is part of vegetable oil processing plant which is designed to extract oil directly from oil seeds containing less than 20% oil, like soybeans, after flaking. Or it extracts oil from pre-pressed or fully pressed cake of seeds containing more than 20% oil, like sun...
-
Computer Controlled Auto Elevator
Features 1. One -key operation, safe and reliable, high degree of intelligence, suitable for the Elevator of all oil seeds except rape seeds. 2. The oil seeds is automatically raised, with fast speed. When the oil machine hopper is full, it will automatically stop the lifting material, and will start up automatically when the oil seed is insufficient. 3. When there is no material to be raised during the process of ascension, the buzzer alarm w...
-
LYZX series cold oil pressing machine
Product Description LYZX series cold oil pressing machine is a new generation of low-temperature screw oil expeller developed by FOTMA, it is applicable for producing vegetable oil at low temperature for all kinds of oil seeds, such as rapeseed, hulled rapeseed kernel, peanut kernel, chinaberry seed kernel, perilla seed kernel, tea seed kernel, sunflower seed kernel, walnut kernel and cotton seed kernel. It is the oil expeller that specially s...