YZY Series Oil Pre-press Machine
Product Description
YZY Series Oil Pre-press machines are continuous type screw expeller, they are suitable for either "pre-pressing + solvent extracting" or "tandem pressing" of processing oil materials with high oil content, such as peanuts, cottonseeds, rapeseed, sunflower seeds, etc. This series oil press machine is a new generation of big capacity pre-press machine with the features of high rotating speed and thin cake.
Under normal pretreatment conditions, YZY series oil pre-press machine has the following characteristics:
1. Large processing capacity, so the installation space, power consumption, the job of operation and maintenance are reduced accordingly.
2. The main parts such as main shaft, screws, cage bars, gears are all made of good quality alloy materials and carbonized hardened, they can stand long tearing under long-term high temperature working and abrasion.
3. The process from steam cooking at the feeding inlet until oil output and cake outlet is all automatic continuously working, the operation is easy.
4. With steam kettle, the meal is cooked and steamed in the kettle. The temperature and water content of feeding materials can be regulated according to different oil seeds requirements, to improve the oil yield and get higher quality of oil.
5. The pressed cake is suitable for solvent extraction. The capillary interstice on the surface of the cake are dense and clear, it is helpful on solvent penetration.
6. The oil and water content in cake are suitable for solvent extraction.
7. The pre-pressed oil is with higher quality than the obtained oil by single pressing or single solvent extraction.
8. The machines can be used for cold pressing if change the pressing worms.
Technical Parameters for YZY240-3
1. Capacity:110-120T/24hr.(Take sunflower kernel or rapeseed seeds as example)
2. Residual oil content in cake: around 13%-15%( under appropriate preparation condition)
3. Power: 45kw + 15kw
4. Steam pressure: 0.5-0.6Mpa
5. Net weight: about 6800kgs
6. Overall dimension(L*W*H): 3180×1210×3800 mm
Technology Parameters for YZY283-3
1. Capacity:140-160T/24hr.(Take sunflower kernel or rapeseed seeds as example)
2. Residual oil content in cake: 15%-20%( under appropriate preparation condition)
3. Power: 55kw + 15kw
4. Steam pressure: 0.5-0.6Mpa
5. Net weight: about 9380kgs
6. Overall dimension(L*W*H): 3708×1920×3843 mm
Technical Parameters for YZY320-3
1. Capacity: 200-250T/24hr(Take the canola seed for instance)
2. Residual oil content in cake: 15%-18%( under appropriate preparation condition)
3. Steam pressure: 0.5-0.6Mpa
4. Power: 110KW + 15 kw
5. Rotate speed: 42rpm
6. Electric current of Main motor: 150-170A
7. Thickness of cake: 8-13mm
8. Dimension(L×W×H):4227×3026×3644mm
9. Net weight: about 11980Kg
Technical Parameters for YZY340-3
1. Capacity: over than 300T/24hr(Take the cotton seeds for instance)
2. Residual oil content in cake: 11%-16%( under appropriate preparation condition)
3. Steam pressure: 0.5-0.6Mpa
4. Power: 185kw + 15kw
5. Rotate speed: 66rpm
6. Electric current of Main motor: 310-320A
7. Thickness of cake: 15-20mm
8. Dimension(L×W×H):4935×1523×2664mm
9. Net weight: about 14980Kg
Related products
-
LYZX series cold oil pressing machine
Product Description LYZX series cold oil pressing machine is a new generation of low-temperature screw oil expeller developed by FOTMA, it is applicable for producing vegetable oil at low temperature for all kinds of oil seeds, such as rapeseed, hulled rapeseed kernel, peanut kernel, chinaberry seed kernel, perilla seed kernel, tea seed kernel, sunflower seed kernel, walnut kernel and cotton seed kernel. It is the oil expeller that specially s...
-
LD Series Centrifugal Type Continous Oil Filter
Features 1. Operation: vertical centrifugal oil refining, rapid separation of oil sludge, the whole process only takes 5-8 minutes. 2. Automatic control: set the timer, automatically stop the oil, the oil is not stored in the machine, and the refining of hundreds of kilograms only needs to be cleaned once. 3. Installation: flat floor, can be installed without screw fixation. Technical Data ...
-
200A-3 Screw Oil Expeller
Product Description 200A-3 screw oil expeller is widely applies for oil pressing of rapeseeds, cotton seeds, peanut kernel, soybean, tea seeds, sesame, sunflower seeds, etc.. If change the inner pressing cage, which can be used for oil pressing for low oil content materials such as rice bran and animal oil materials. It is also the major machine for second pressing of high oil content materials such as copra. This machine is with high market s...
-
Oil Seeds Pretreatment Processing- Small Peanut...
Introduction Peanut or groundnut is one of the important oil crops in the world, groundnut kernel is often used to make cooking oil. Peanut huller is used to shell peanuts. It can shell peanut completely, separate shells and kernels with high-efficiency and almost without damage to the kernel. The sheeling rate can be ≥95%, the breaking rate is ≤5%. While peanut kernels are used for food or the raw material for oil mill, the shell could be use...
-
ZY Series Hydraulic Oil Press Machine
Product Description FOTMA focus on producing oil press machines and our products won several national patents and was official certified, the technical of oil press is continuous updating and the quality is reliable. With excellent production technology and high-quality after-sales service, the market share is steadily rising. Through gather tens of thousands of consumer’s successful pressing experience and management model, we can provide you...
-
Oil Seeds Pretreatment Processing – Oil S...
Introduction After cleaning, oilseeds such as sunflower seeds are conveyed to the seed dehulling equipment to separate the kernels. The purpose of oil seeds shelling and peeling is to improve the oil rate and the quality of the extracted crude oil, improve the protein content of the oil cake and reduce the cellulose content, improve the use of oil cake value, reduce the wear and tear on the equipment, increase the effective production of equip...